How to Clean Your GLOVES
Cut Resistant Gloves & Nitrile Coated Gloves
Wash the gloves in tepid water (maximum 104°F or 40°C) using commercial laundry soap or detergent for 10 minutes.
Do not bleach.
If the gloves are not completely clean, repeat step 1 and rinse again in cold water.
Do not chemical wash.
After rinsing, gently squeeze out excess water and lay the gloves flat to dry.
Do not iron.
If necessary, tumble dry the gloves on a low heat setting (maximum 104°F or 40°C) until completely dry.
Mechanic Gloves & Outdoor Gloves
Hand wash the gloves in cold water (maximum temperature of 86°F or 30°C) using mild soap or detergent for no longer than 10 minutes.
Do not bleach.
If the gloves are not completely clean, repeat step 1 and wash again. After washing, gently squeeze out excess water and hang the gloves to line dry.
Do not chemical clean.
Hang dry the gloves to avoid any potential shrinkage or damage.
If necessary, tumble dry the gloves on low temperature until it is completely dry.
Do not iron.
WG201
Use commercial laundry soap or detergent and wash the gloves in cold water (maximum temperature of 86°F or 30°C) for 10 minutes (no machine wash).
If the gloves are not completely clean, repeat step 1 and rinse again in cold water.
Squeeze out excess water and dry the gloves flat.
Do not tumble dry.
Do not bleach, chemical wash, or iron the gloves.
